Budget

The MUX-24 is a simple analog to DMX converter which accepts the 0-10V signal and a DMX signal is generated.

1x DMX input / 4x DMX output, electric isolation, 3pin / 5pin XLR in- and outputs, every DMX output (with LED display), features an indepent driver, DATA+ & DATA- indicator DMX switch is incorporated allowing to isolate from the malfunction caused by DMX input.

Pocket DMX controller, 512 DMX channel outputs available, up to 120 cues to be recorded, LCD in 4 lines x 20 digits, numerical keypad with functional key operation, interactive command line input, snap-shot of incoming DMX signals, 3 pin / 5 pin DMX output (input) connector.

DMX recorder with access to memory and CF card, 4 sequences + start-up + shutdown available on memory card, 33 sequences available on CF card, PLAY, PAUSE and STOP functions, manual / auto-start / DMX monitor / DMX trigger / program / setup mode, 32 MB CF card, remote controllable PLAY, STOP and RECORD functions.

The DMX-72 SE Multi Exchanger converts the signal from DMX-512 to 72 channel analog output and also from MIDI to 72 channel analog output. You can select analog output from +(-)10V, +(-)12V and +(-)15V. It will be used for example to control analog dimmerpacks with a DMX-512 controller.

DMX signals are digital data streams which can not be added by connecting in series. Therefore you need a converter which is equipped with two receivers and one transmitter. This device receives all data and emits them exact composed. The merging can take place in different kinds: signal cohere, filter the highest signal and pass on, convert addresses etc.

5 Pin DMX 6 Channel splitter for truss mounting