Budget

6 channel dimmer pack, 12 chase programs can be recalled, chase speed is adjustable, electronic protection against overheating and short circuits, phase correction for linear dimming / selectable from linear/switch/square, DMX or analogue input works without any adjustment, 10A circuit breaker per channel.

The RackDim is a 4 channel dimming pack. It has 4 independent outputs with a load of 4 Amp each. The RackDim is equipped with a sound-light function as well 16 pre-programmed chases. The RackDim can be controlled by DMX and several modes can be selected (1 channel mode, 2 channel mode, 4 channel mode. For automatic sound-light functions the speed and fade-times can be adjusted. The RackDim has 4 IEC outputs and 1 Bulgin 8 pole output.

DMX 512 4CH. Dimmerpack The MultiDim MKII is a 4 channel Dimmerpack with 16 built-in programs. This device is music-controlled, the chasing speed can be adjusted. Channel output: 5A per channel, total 16A.

The MPX 605 is a 6 channel digital dimmer pack with 9A total power output, controlled via DMX 512 or MIDI notes. 17 internal programs are retrievable. Power in/out cables are clamped on the rear. The 4-digit display shows current activity and function state.

Installation directly on to top hat din rail. Controllable via 3pin DMX signal. The dimmer is able to provide units up to 10A and can be controlled manually via buttons on the front. Also the device offers a LCD display and can be used as switch or dimmer.

6.3A single channel dimmer with local control and flash button.

Small, compact dimmer to clip on the brackets of most lighting fixtures. Any halogen light source can be modified to a DMX dimmable spot. The capacity of 6A is suitable for 1000W lamps with reserve. A security eye can be used as additional security to the screw-clip. The DMX adrdress can be set by, recessed, did-switches.

512 DMX-channels, Wall / Truss mounting, Dim and switch, Dimming pre-set, Dimming limit, Capacitive load 6A / 1400W, Inductive load 3A / 700W.